AN EFFICIENT COUPLED POLYNOMIAL INTERPOLATION SCHEME TO ELIMINATE MATERIAL-LOCKING IN THE EULER-BERNOULLI PIEZOELECTRIC BEAM FINITE ELEMENT

Authors

  • LITESH N SULBHEWAR DEPARTMENT OF AEROSPACE ENGINEERING, INDIAN INSTITUTE OF SPACE SCIENCE AND TECHNOLOGY, THIRUVANANTHAPURAM-695547, KERALA, INDIA.
  • P. RAVEENDRANATH DEPARTMENT OF AEROSPACE ENGINEERING, INDIAN INSTITUTE OF SPACE SCIENCE AND TECHNOLOGY, THIRUVANANTHAPURAM-695547, KERALA, INDIA.

Keywords:

COUPLED FIELD, FINITE ELEMENTS, PIEZOELECTRIC, SMART STRUCTURE

Abstract

THE CONVERGENCE CHARACTERISTIC OF THE CONVENTIONAL TWO-NODED EULER-BERNOULLI PIEZOELECTRIC BEAM FINITE ELEMENT DEPENDS ON THE CONFIGURATION OF THE BEAM CROSS-SECTION. THE ELEMENT SHOWS SLOWER CONVERGENCE FOR ASYMMETRIC MATERIAL DISTRIBUTION IN THE BEAM CROSS-SECTION DUE TO ‘MATERIAL-LOCKING’ CAUSED BY EXTENSION-BENDING COUPLING. HENCE, THE USE OF CONVENTIONAL EULER-BERNOULLI BEAM FINITE ELEMENT TO ANALYZE PIEZOELECTRIC BEAMS WHICH ARE GENERALLY MADE OF THE HOST LAYER WITH ASYMMETRICALLY SURFACE BONDED PIEZOELECTRIC LAYERS/PATCHES, LEADS TO INCREASED COMPUTATIONAL EFFORT TO YIELD CONVERGED RESULTS. HERE, AN EFFICIENT COUPLED POLYNOMIAL INTERPOLATION SCHEME IS PROPOSED TO IMPROVE THE CONVERGENCE OF THE EULER-BERNOULLI PIEZOELECTRIC BEAM FINITE ELEMENTS, BY ELIMINATING ILL-EFFECTS OF MATERIAL-LOCKING. THE EQUILIBRIUM EQUATIONS, DERIVED USING A VARIATIONAL FORMULATION, ARE USED TO ESTABLISH RELATIONSHIPS BETWEEN FIELD VARIABLES. THESE RELATIONS ARE USED TO FIND A COUPLED QUADRATIC POLYNOMIAL FOR AXIAL DISPLACEMENT, HAVING CONTRIBUTIONS FROM AN ASSUMED CUBIC POLYNOMIAL FOR TRANSVERSE DISPLACEMENT AND ASSUMED LINEAR POLYNOMIALS FOR LAYERWISE ELECTRIC POTENTIALS. A SET OF COUPLED SHAPE FUNCTIONS DERIVED USING THESE POLYNOMIALS EFFICIENTLY HANDLE EXTENSION-BENDING AND ELECTROMECHANICAL COUPLINGS AT THE FIELD INTERPOLATION LEVEL ITSELF IN A VARIATIONALLY CONSISTENT MANNER, WITHOUT INCREASING THE NUMBER OF NODAL DEGREES OF FREEDOM.  THE COMPARISON OF RESULTS OBTAINED FROM NUMERICAL SIMULATION OF TEST PROBLEMS SHOWS THAT THE CONVERGENCE CHARACTERISTIC OF THE PROPOSED ELEMENT IS INSENSITIVE TO THE MATERIAL CONFIGURATION OF THE BEAM CROSS SECTION.   

Author Biographies

LITESH N SULBHEWAR, DEPARTMENT OF AEROSPACE ENGINEERING, INDIAN INSTITUTE OF SPACE SCIENCE AND TECHNOLOGY, THIRUVANANTHAPURAM-695547, KERALA, INDIA.

RESEARCH SCHOLAR,DEPARTMENT OF AEROSPACE ENGINEERING,
INDIAN INSTITUTE OF SPACE SCIENCE AND TECHNOLOGY, THIRUVANANTHAPURAM-695547, KERALA, INDIA.

P. RAVEENDRANATH, DEPARTMENT OF AEROSPACE ENGINEERING, INDIAN INSTITUTE OF SPACE SCIENCE AND TECHNOLOGY, THIRUVANANTHAPURAM-695547, KERALA, INDIA.

ADJUNCT PROFESSOR, DEPARTMENT OF AEROSPACE ENGINEERING,
INDIAN INSTITUTE OF SPACE SCIENCE AND TECHNOLOGY, THIRUVANANTHAPURAM-695547, KERALA, INDIA.

Downloads

Published

2015-01-22

Issue

Section

Articles