Abstract
A new finite element (FE)-based approach for calculating crack-tip strain energy density factor (SEDF) named “element strain energy density factor (ESEDF) approach” was proposed. Mode I, mode II, mode III and mixed mode cracks in both 2D models and 3D models were analyzed. A da/dN-ΔS-R equation considering stress ratios was proposed for mode I cracks and a fatigue crack growth test was done. The results show that the ESEDF approach directly computes SEDF from FE results without assuming plane stress/strain or calculating stress intensity factors. It performs best for regular mode I/II cracks in 2D and 3D models, but is less accurate for complex mixed-mode, 3D mode III, surface-cracks and coarse-mesh cases, while remaining acceptable accuracy. The proposed da/dN-ΔS-R equation correlates fatigue crack growth rate with SEDF ranges considering stress ratios in mode I cracks for steels well.

This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright (c) 2026 ZHAO FANG, Fan Yang, Sheng Shen, Aiqun Li, Jingwen Yu