Latin American Journal of Solids and Structures

SCOPUS 2025 = 2.4

Indexed: WEB of SCIENCE,
SCOPUS, DOAJ, SCIELO,…

Recent Articles

Le Hong Hieu, Thinh Nhan Hoang, Quoc Hoa Pham
e9256
[In Press] A smoothed DSG4 flat-shell framework for dynamic analysis of auxetic honeycomb sandwich shells with elastic boundary conditions

This study develops a smoothed discrete shear gap four-node (SM-DSG4) flat-shell element for the free-vibration and transient analyses of auxetic honeycomb sandwich shells with elastic boundary conditions. The sandwich shell consists of isotropic face sheets and a re-entrant honeycomb core represented by an equivalent orthotropic continuum. Within the first-order shear deformation theory, cell-based strain smoothing is applied to the membrane and bending fields, while the transverse shear strain is evaluated using the discrete shear gap technique to alleviate shear locking. Elastic supports are modeled by distributed translational and rotational springs, enabling classical and intermediate boundary conditions to be treated within a unified framework. The formulation is validated against available benchmark solutions and shows improved robustness to mesh distortion. Numerical studies reveal significant effects of shell curvature, honeycomb cell geometry, boundary conditions, and support stiffness on the natural frequencies and transient responses under pulse and blast-type loading.

PDF
Ardi Noerpamoengkas, Wiwiek Hendrowati, Harus Laksana Guntur
e9257
[In Press] Modular Symmetric Plate-Based Tuned Mass Damper for Scalable Multi-Frequency Vibration Suppression

Increasing the number of Tuned Mass Damper (TMD) natural frequencies is important for developing TMD models that cover a wider frequency range in multimodal systems. Previous research used an asymmetrical model to increase the natural frequency. The larger counterweight side of this asymmetric damper model must be placed closer to the nearest cable end to achieve better performance, which limits placement flexibility. This research developed a new multi-frequency damper model with plates, Modular Symmetric Plate TMD (MSPTMD), in which adding natural frequencies with a symmetric model and the addition method with a modular design concept are easier than existing asymmetric models. Adding natural frequencies simply requires adding plate modules. Design parameter studies were conducted to determine plate dimensions with specific natural frequencies. Three Al1100 plate modules were assembled and applied to an all-aluminium alloy cable model for three target natural frequencies in this research. The study used finite element method simulation and experiments with an electrodynamic shaker. The results show that the Modular Symmetric Plate TMD (MSPTMD) is feasible and capable of reducing vibrations at all three natural frequencies. Scalable multi-frequency vibration suppression can be achieved by adding more plate modules for more target frequencies.

PDF
Qiang Sheng, Xiaoye Bie, Changsheng Li, He Zhang
e9206
[In Press] Shock Response of Projectile-Borne Electronics During Concrete Penetration: Theoretical Modeling and Numerical Simulation

Predicting shock overloads of projectile-borne electronics during high-velocity concrete penetration is a key issue in impact dynamics. Rigid-body models ignore stress waves, while high-fidelity simulations are too costly. This study presents a dynamic model integrates stress-wave propagation, nonlinear mechanical behavior of cushioning materials, and nonlinear contacts between components. Validated against a 908 m/s impact test, the model matches experimental deceleration history well. An efficient ABAQUS/Explicit simulation using a user-defined load subroutine avoids target meshing, reducing peak deceleration error to 0.25% and capturing key frequencies (124 Hz and 3,233 Hz). Parametric analyses found that the shock amplification factor from projectile to electronics increases from 1.28 to 1.54 as impact velocity rises from 600 to 1,000 m/s. Target thickness exhibits a saturation effect on peak deceleration, governed primarily by projectile geometry rather than target strength or velocity. Under consecutive impacts, normalized peak deceleration converges to unity with increasing inter-target spacing, indicating enhanced stress wave attenuation. These findings provide a theoretical basis and technical support for the shock-resistant design of the onboard electronics under high-overload environments.

PDF
Xiaoran Chen, Yulin Lu
e9021
Plastic softening characteristics of strength parameters of coal and its impact on stress and deformation surrounding the borehole

The purpose of this study is to propose a new understanding of the influence of plastic softening of strength parameters on the mechanical properties of the coal surrounding borehole. Firstly, a thorough analysis of experimental data from previous studies reveals that the plastic softening behavior of strength parameters essentially manifests as a reduction in cohesion and a variation in internal friction angle. Subsequently, a theoretical and numerical model for deformation and stress distribution of coal surrounding borehole is established, which considers the softening effect of strength parameters and covers different regions. The maximum error between the numerical and theoretical results is found to be within 12%, which validates the reliability of the proposed analytical model. Finally, field verification results confirm that the mechanical response results derived from the model considering only the plastic softening effect of cohesion are smaller than the field-measured data, indicating that the influence of the internal friction angle must also be adequately accounted for in related analyses. 

PDF
Y. Shi, S. Yuan, P. Wu, B. Hu, L. Fu, J. X. Luo, Z. W. Yang
e9221
Region-Specific Hard-Impact Response Characteristics of an Airdrop Equipment Subframe Based on Equivalent Drop Tests

Residual vertical velocity during late-stage airbag cushioning can cause localized hard contact between an airdrop-equipment subframe and the ground, which whole-vehicle overload measurements cannot resolve. This study characterizes region-specific hard-impact responses and identifies vulnerable subframe regions. An equivalent contact framework based on residual-velocity equivalence considered contact reaction force, load-transfer paths, and regional dynamic responses. Free-drop tests (100, 150, 200 mm) used a four-region subframe and six uniaxial accelerometers at 50 kHz. Records (0.4 s) were wavelet-detrended and 10 kHz low-pass filtered. Peak acceleration, RMS acceleration, and pseudo-velocity shock response spectrum (PV-SRS) were evaluated. Responses concentrated in the wheel-arch beam and central circular load-bearing regions. At 200 mm, C6 had peak acceleration 707 g, RMS 86 g, and PV-SRS peak 6.9 m/s, with peak frequency 322–335 Hz; C5's dominant peak shifted from 1 kHz to 276 Hz. The framework reveals hard-impact differences obscured by whole-vehicle measurements and supports landing-impact safety and structural reliability assessment of airdrop equipment.

PDF

Thank you for visiting the Latin American Journal of Solids and Structures, LAJSS, a scientific engineering journal.

Researchers all over the world are welcome to submit their papers to LAJSS covering theoretical, numerical and experimental topics in continuum and applied mechanics, in both their linear and non-linear aspects. Interest covers areas like Vibration : Dynamics : Aerospace and Automotive Engineering : Composite Materials : Experimental and Computational Mechanics : Material Modelling : Concrete : Earthquake Eng : Nanomechanics : Ocean Eng. : Optimization : Control : Continuum Mechanics : Waves : Fluid-struc. interaction.

Articles of technological content will usually not be accepted. 

LAJSS is 100% free for readers.

You can freely access with no login any article published by LAJSS.

This is an open-access journal, which means that all its content is made freely available to the user or their institution. Users are authorized to read, download, copy, distribute, print, search, or link to the full texts of the articles, or use them for any other lawful purpose, without asking for prior permission from the publisher or the author.

Indexed in the Web of Science, SCOPUS, DOAJ, EBSCO, SOCOLAR, SCIELO and others. 

Cite-Score SCOPUS 2025: 2.40 

LAJSS operates based on APC, Article Processing Charge. APC will be applied only to accepted articles.

A FAST TRACK submission mode is offered to those authors who wish to have their peer reviewed and accepted paper published within 35 days from submission and plagiarism screening. 

LAJSS adopts a blind review strategy for analyses of the submitted papers. Usually, two reviewers are select for the reviewing process, a third being used in cases of controversy. The Editor for a given article is disclosed to all readers in the final published paper. Authors are requested to have an ORCID. All authors should indicated their contribution to the paper contents.  

As for 2025, LAJSS desk rejection rate is 79% and the average time between submission and publication is 16 weeks.

Please note that, upon discretion of the Editor, reviewers are entitled to a discount of 50 Euros in their LAJSS publication APC.

Editor-in-Chief and Publisher

MARCÍLIO ALVES , University of Sao Paulo, Brazil

Editors

ROGÉRIO JOSÉ MARCZAK , Federal University of Rio Grande do Sul, Porto Alegre, RS , Brazil 
PABLO ANDRÉS MUÑOZ ROJAS , Universidade do Estado de Santa Catarina, Joinville, SC , Brazil 
MARCO LÚCIO BITTENCOURT, University of Campinas, Brazil