Abstract
Residual vertical velocity during late-stage airbag cushioning can cause localized hard contact between an airdrop-equipment subframe and the ground, which whole-vehicle overload measurements cannot resolve. This study characterizes region-specific hard-impact responses and identifies vulnerable subframe regions. An equivalent contact framework based on residual-velocity equivalence considered contact reaction force, load-transfer paths, and regional dynamic responses. Free-drop tests (100, 150, 200 mm) used a four-region subframe and six uniaxial accelerometers at 50 kHz. Records (0.4 s) were wavelet-detrended and 10 kHz low-pass filtered. Peak acceleration, RMS acceleration, and pseudo-velocity shock response spectrum (PV-SRS) were evaluated. Responses concentrated in the wheel-arch beam and central circular load-bearing regions. At 200 mm, C6 had peak acceleration 707 g, RMS 86 g, and PV-SRS peak 6.9 m/s, with peak frequency 322–335 Hz; C5's dominant peak shifted from 1 kHz to 276 Hz. The framework reveals hard-impact differences obscured by whole-vehicle measurements and supports landing-impact safety and structural reliability assessment of airdrop equipment.

This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright (c) 2026 Y. Shi, S. Yuan, P. Wu, B. Hu, L. Fu, J.X. Luo, Z.W. Yang