Vol. 22 No. 6 (2025)
SCOPUS 2025 = 2.4

Indexed: WEB of SCIENCE,
SCOPUS, DOAJ, SCIELO,…
Changlin Zhu, Chuang Liu, Qiang Sheng, Yuxuan Deng, Xiaoming Wang
e8546
Dynamic response of projectile and charge during penetration into concrete target with high velocity

To study the dynamic response characteristics of the penetrating warhead under the impact load, experiments of projectile penetration into a concrete target were performed based on a 30-mm ballistic gun. Penetration resistance model of the projectile penetration into the concrete target was modified by considering the wake separation and cratering effects associated with oblique penetration. The projectile deformation process during penetration was analyzed by the modified penetration model and validated by experimental results. In particular, the deformation, stress, and strain distribution characteristics of the projectile and charge were analyzed. Results show that during oblique penetration of the target by the projectile, the nose of projectile endures substantial compressive forces due to the compression wave. This results in considerable deformation within a region spanning from 0.32 to 0.59 times the projectile’s length from the nose. Additionally, a coupling effect of compression and tension waves induces significant transverse deformation at the projectile’s tail, spanning from 0.88 to 1.0 times the projectile’s length from the tail end.

PDF
Zhanhong Guo, Na Han, Meng Zou, Yansong Liu, Jing Liu
e8621
Investigation of Quasi-Static and Dynamic Mechanical Properties of Bio-Inspired Thin-Walled Structures under Axial Crushing

This study proposes a bio-inspired thin-walled energy-absorbing structure with self-similar configurations mimicking conch shells. Through quasi-static compression and drop hammer impact tests, the energy absorption characteristics were comparatively analyzed between the bio-inspired and conventional thin-walled tubes. The results demonstrate that under quasi-static compression, the bio-inspired tubes exhibit stable progressive buckling deformation, with a 21.39% increase in mean crush force (MCF) and a 12.95% improvement in crush force efficiency (CFE). During dynamic impact conditions, the bio-inspired structures show significantly reduced peak load while achieving enhanced specific energy absorption (SEA) and mean crush force (MCF), along with a 24.61% increase in crush force efficiency (CFE) and reduced undulation of load-carrying capacity (ULC). These findings offer novel perspectives for the development of innovative passive safety devices.

PDF
Domingos Sávio Aguiar, Carlos d’Andrade Souto, Maurício Guimaraes da Silva, Guilherme da Silveira
e8427
Study of propellant sloshing with passive mitigation in the stability of a micro- launch vehicle

This work analyzes the stability of a micro-launch vehicle (Micro-LV) considering the effects of sloshing during the ascent phase of flight in the atmosphere with the burn of the first stage. A conceptual Two-Stage to Orbit (TSTO) Micro-LV utilizing liquid propulsion with LOX and RP-1 is implemented as a benchmark for stability analyses. Its mission objective is to deploy a payload of 100 kg into a low Earth orbit (LEO) at an altitude of 300 km. Linearized equations of motion for rigid and flexible bodies, along with engine inertia effects and sloshing, are considered and arranged in a state-space formulation. Transfer functions between the pitch angle  and the gimbal angle of the engine  are determined for open-loop stability analyses considering a proportional-derivative (PD) attitude controller. Root locus techniques are employed to identify regions located in the right half-plane (RHP) associated with sloshing frequencies, which characterize instability. Due to propellant consumption throughout the flight, stability analyses are conducted for various fill ratios (FR) ranging from 0% to 100% of the tanks, in increments of 10%. It is observed that at a fill ratio of 90%, the RP-1 tank exhibits instability because the sloshing mass is situated between the center of percussion (CP) and the center of gravity (CG) of the LV, in the area referred by some authors as the danger zone. It was noted that flexibility slightly dampened the effects of sloshing, but not significantly. Additionally, the coupling between the tanks concerning the variation of damping from one tank to another was investigated. A solution for the passive mitigation of sloshing instability is implemented by introducing ring baffles with a minimum damping requirement of 0.15%, and its effect on vehicle stability is analyzed.

PDF