Formation and Penetration Damage Effects of Uniform-Thickness Liner TEFPs on Metal Targets
SCOPUS 2025 = 2.4

Indexed: WEB of SCIENCE,
SCOPUS, DOAJ, SCIELO,…
PDF

How to Cite

Qin, Q., ji, C., Wang, X., Gao, Y., Wu, G., & Tang, W. (2026). Formation and Penetration Damage Effects of Uniform-Thickness Liner TEFPs on Metal Targets. Latin American Journal of Solids and Structures, 23(9), e9160. https://doi.org/10.1590/1679-7825/e9160

Abstract

This study investigates a toroidal explosively formed projectile (TEFP) warhead with an 88 mm charge diameter and uniform-thickness liners. Normal penetration experiments on double-layer Q235 steel targets were conducted at varying stand-off distances and liner thicknesses (3 mm and 4.5 mm), complemented by LS-DYNA simulations to analyze TEFP formation and penetration behavior. Increasing stand-off distance and liner thickness enlarge the penetration hole diameter but reduce penetration capability and behind-armor damage, with the hole-bottom failure mode transitioning from shear to tension. Grain evolution at hole sidewalls proceeds through dynamic recrystallization, severe elongation, and distorted deformation. Based on the impact angle θ, three penetration modes are identified: positive cutting (0° < θ ≤ 85°), accurate cutting (85° < θ ≤ 95°), and reverse cutting (95° < θ < 180°).

PDF
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright (c) 2026 Qingxin Qin, Chong ji, Xin Wang, Yuxuan Gao, Gang Wu, Weijian Tang

Downloads

Download data is not yet available.