Equivalent-thickness conversion among metallic targets is important for vulnerability assessment and protection modelling, but conventional coefficients are often treated as material constants and seldom include fragment morphology. Penetration tests were conducted on 616 armor steel, Q235 steel, and LY12 aluminum alloy using steel spheres, tungsten spheres, and tungsten block fragments. A V50-based database was established, and failure mechanisms were examined from perforation morphology, exit-side SEM, and metallography. A semi-empirical ballistic-limit model was developed from key variables, with a residual correction term to describe the coupled deviation between fragment geometry and target response. The corrected model achieved a mean absolute percentage error of 7.91% and a coefficient of determination of 0.852. The conversion matrices show strong dependence on fragment type. For 616 steel converted to LY12 aluminum alloy, the coefficient increases from 2.50 for spherical fragments to 3.48 for tungsten blocks, giving a morphology-induced deviation of 39.03%. Thus, conversion should be defined by fragment type and target material rather than by a single material constant.
This study investigates plane P-wave scattering by a circular-arc canyon in a nearly saturated soil half-space. An analytical model is established based on Biot’s two-phase poroelastic theory and the homogeneous-fluid assumption. Surface displacement amplitudes are obtained using Fourier–Bessel series expansions and a large-arc approximation. The solution is verified by convergence analysis and by reducing the formulation to the saturated case for comparison with published results. Parametric analyses clarify the effects of saturation, incident angle, depth-to-width ratio, dimensionless frequency, and porosity on horizontal and vertical surface responses. The results show that saturation mainly affects the response near full saturation, while the two displacement components exhibit different sensitivities to incident angle. Larger depth-to-width ratios and higher dimensionless frequencies enhance canyon-induced scattering, whereas increasing porosity generally reduces displacement amplitudes. The findings provide a theoretical basis for seismic response evaluation of nearly saturated sites with circular-arc canyons.
This study investigates a toroidal explosively formed projectile (TEFP) warhead with an 88 mm charge diameter and uniform-thickness liners. Normal penetration experiments on double-layer Q235 steel targets were conducted at varying stand-off distances and liner thicknesses (3 mm and 4.5 mm), complemented by LS-DYNA simulations to analyze TEFP formation and penetration behavior. Increasing stand-off distance and liner thickness enlarge the penetration hole diameter but reduce penetration capability and behind-armor damage, with the hole-bottom failure mode transitioning from shear to tension. Grain evolution at hole sidewalls proceeds through dynamic recrystallization, severe elongation, and distorted deformation. Based on the impact angle θ, three penetration modes are identified: positive cutting (0° < θ ≤ 85°), accurate cutting (85° < θ ≤ 95°), and reverse cutting (95° < θ < 180°).