Articles in Press
SCOPUS 2025 = 2.4

Indexed: WEB of SCIENCE,
SCOPUS, DOAJ, SCIELO,…
Articles in Press
Le Hong Hieu, Thinh Nhan Hoang, Quoc Hoa Pham
e9256
[In Press] A smoothed DSG4 flat-shell framework for dynamic analysis of auxetic honeycomb sandwich shells with elastic boundary conditions

This study develops a smoothed discrete shear gap four-node (SM-DSG4) flat-shell element for the free-vibration and transient analyses of auxetic honeycomb sandwich shells with elastic boundary conditions. The sandwich shell consists of isotropic face sheets and a re-entrant honeycomb core represented by an equivalent orthotropic continuum. Within the first-order shear deformation theory, cell-based strain smoothing is applied to the membrane and bending fields, while the transverse shear strain is evaluated using the discrete shear gap technique to alleviate shear locking. Elastic supports are modeled by distributed translational and rotational springs, enabling classical and intermediate boundary conditions to be treated within a unified framework. The formulation is validated against available benchmark solutions and shows improved robustness to mesh distortion. Numerical studies reveal significant effects of shell curvature, honeycomb cell geometry, boundary conditions, and support stiffness on the natural frequencies and transient responses under pulse and blast-type loading.

PDF
Ardi Noerpamoengkas, Wiwiek Hendrowati, Harus Laksana Guntur
e9257
[In Press] Modular Symmetric Plate-Based Tuned Mass Damper for Scalable Multi-Frequency Vibration Suppression

Increasing the number of Tuned Mass Damper (TMD) natural frequencies is important for developing TMD models that cover a wider frequency range in multimodal systems. Previous research used an asymmetrical model to increase the natural frequency. The larger counterweight side of this asymmetric damper model must be placed closer to the nearest cable end to achieve better performance, which limits placement flexibility. This research developed a new multi-frequency damper model with plates, Modular Symmetric Plate TMD (MSPTMD), in which adding natural frequencies with a symmetric model and the addition method with a modular design concept are easier than existing asymmetric models. Adding natural frequencies simply requires adding plate modules. Design parameter studies were conducted to determine plate dimensions with specific natural frequencies. Three Al1100 plate modules were assembled and applied to an all-aluminium alloy cable model for three target natural frequencies in this research. The study used finite element method simulation and experiments with an electrodynamic shaker. The results show that the Modular Symmetric Plate TMD (MSPTMD) is feasible and capable of reducing vibrations at all three natural frequencies. Scalable multi-frequency vibration suppression can be achieved by adding more plate modules for more target frequencies.

PDF
Qiang Sheng, Xiaoye Bie, Changsheng Li, He Zhang
e9206
[In Press] Shock Response of Projectile-Borne Electronics During Concrete Penetration: Theoretical Modeling and Numerical Simulation

Predicting shock overloads of projectile-borne electronics during high-velocity concrete penetration is a key issue in impact dynamics. Rigid-body models ignore stress waves, while high-fidelity simulations are too costly. This study presents a dynamic model integrates stress-wave propagation, nonlinear mechanical behavior of cushioning materials, and nonlinear contacts between components. Validated against a 908 m/s impact test, the model matches experimental deceleration history well. An efficient ABAQUS/Explicit simulation using a user-defined load subroutine avoids target meshing, reducing peak deceleration error to 0.25% and capturing key frequencies (124 Hz and 3,233 Hz). Parametric analyses found that the shock amplification factor from projectile to electronics increases from 1.28 to 1.54 as impact velocity rises from 600 to 1,000 m/s. Target thickness exhibits a saturation effect on peak deceleration, governed primarily by projectile geometry rather than target strength or velocity. Under consecutive impacts, normalized peak deceleration converges to unity with increasing inter-target spacing, indicating enhanced stress wave attenuation. These findings provide a theoretical basis and technical support for the shock-resistant design of the onboard electronics under high-overload environments.

PDF
Leonardo Barros da Luz, Flávio Luiz Cardoso-Ribeiro, Pedro Paglione
e9100
[In Press] Nonlinear Structural Dynamics of Folding Wingtip: A Flexible Multibody Approach

Folding wingtips (FWTs) offer an innovative solution to reconcile aerodynamic efficiency gains of higher aspect ratio wings with airport gate restrictions. Analyzing these adaptive structures requires modeling geometric nonlinearities induced by large displacements, which traditional linear models fail to capture. This study expands the computationally efficient Flexible Multibody Rayleigh-Ritz (FMBRR) framework to analyze highly flexible structures with articulated parts. The methodology couples a linear structural model for local deformation with flexible multibody dynamics to capture global geometric nonlinearities through rigid connections. Novel contributions of this work include a torsional formulation and revolute-joint constraints specifically developed to model the FWT. Results for a highly flexible cantilever beam and an articulated structure demonstrate that the FMBRR framework accurately predicts static and dynamic nonlinear behaviors, significantly reducing computational costs compared to fully nonlinear models without losing fidelity.

PDF
Eduarda Marques Ferreira, Hugo Mouro Leão, Saulo Silvestre de Castro, Roque Luiz da Silva Pitangueira, Lapo Gori
e8974
[In Press] Phase-field modeling of hydraulic fracturing in RVEs of heterogeneous materials

Modeling hydraulic fracturing requires capturing the interaction between fluid flow and solid deformation, which leads to complex crack patterns, especially in materials that are heterogeneous at a given scale. At the microscale, such materials can be described as multiphase media with distinct mechanical properties, where damage initiates and may be significantly affected by internal pressure. This work models pressure-driven fracture propagation in heterogeneous materials using a phase-field approach. Representative volume elements with random particle distributions are generated through a take-and-place strategy and subjected to tensile tests within a phase-field framework. Internal pressure is incorporated by coupling it to the gradient of the phase-field variable, enabling the simulation of pressurized crack propagation. A numerical study evaluates the influence of pressure magnitude and aggregate volume fraction on the fracture response. Results demonstrate the ability of the approach to reproduce pressurized crack patterns in quasi-brittle media, providing a consistent and computationally effective approach for future multiscale analyses.

PDF