Abstract
Predicting shock overloads of projectile-borne electronics during high-velocity concrete penetration is a key issue in impact dynamics. Rigid-body models ignore stress waves, while high-fidelity simulations are too costly. This study presents a dynamic model integrates stress-wave propagation, nonlinear mechanical behavior of cushioning materials, and nonlinear contacts between components. Validated against a 908 m/s impact test, the model matches experimental deceleration history well. An efficient ABAQUS/Explicit simulation using a user-defined load subroutine avoids target meshing, reducing peak deceleration error to 0.25% and capturing key frequencies (124 Hz and 3,233 Hz). Parametric analyses found that the shock amplification factor from projectile to electronics increases from 1.28 to 1.54 as impact velocity rises from 600 to 1,000 m/s. Target thickness exhibits a saturation effect on peak deceleration, governed primarily by projectile geometry rather than target strength or velocity. Under consecutive impacts, normalized peak deceleration converges to unity with increasing inter-target spacing, indicating enhanced stress wave attenuation. These findings provide a theoretical basis and technical support for the shock-resistant design of the onboard electronics under high-overload environments.

This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright (c) 2026 Qiang Sheng, Xiaoye Bie, Changsheng Li, He Zhang