Mechanical Properties of Silicon Carbide Ceramic and Its Penetration Resistance to Tungsten Alloy Fragments
SCOPUS 2025 = 2.4

Indexed: WEB of SCIENCE,
SCOPUS, DOAJ, SCIELO,…
PDF

How to Cite

Gao, D., Yin, G., Zhang, K., Li, Y., & Li, W. (2026). Mechanical Properties of Silicon Carbide Ceramic and Its Penetration Resistance to Tungsten Alloy Fragments. Latin American Journal of Solids and Structures, 23(10), e9203. https://doi.org/10.1590/1679-7825/e9203

Abstract

Silicon carbide (SiC) ceramics have been widely used in lightweight armor protection due to their combination of high compressive strength, high hardness, and low density. The mechanical properties and penetration resistance of SiC ceramics are of significant importance for armor protection design. To investigate the mechanical response and fragment penetration resistance of SiC ceramics, this study systematically carried out plate impact tests, dynamic and quasi-static uniaxial compression tests, as well as ballistic penetration tests. Based on the experimental data, the parameters of the Johnson-Holmquist II (JH-2) constitutive model for the SiC ceramic were calibrated. Subsequently, a numerical simulation model of tungsten alloy fragment penetration into SiC ceramic composite targets was established. The model was validated using tungsten alloy fragment penetration tests on SiC/6061-T6 composite targets, and the penetration characteristics of fragments into SiC/6061-T6 composite targets were systematically compared with those into monolithic 6061-T6 aluminum alloy targets. The error between the experimental and simulation results of the composite target penetration tests is less than 9%, verifying the accuracy of the calibrated JH-2 model parameters. For monolithic 6061-T6 aluminum alloy targets, the penetration depth of spherical fragments is significantly greater than that of cubic and cylindrical fragments. In contrast, for the ceramic composite targets, the residual penetration depth of spherical fragments is markedly lower, indicating that SiC ceramic exhibits substantially better resistance to spherical fragments than to the other two fragment shapes. This study can provide a theoretical basis and data support for the design and performance evaluation of lightweight armor protection.

PDF
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright (c) 2026 Dacheng Gao, Guixiang Yin, Kebin Zhang, Yiming Li, Wenbin Li

Downloads

Download data is not yet available.