Numerical Evaluation of Dynamic Constitutive Models and Modified Analytical Modeling for High-Velocity Penetration of Ultra-High-Performance Concrete (UHPC)
SCOPUS 2025 = 2.4

Indexed: WEB of SCIENCE,
SCOPUS, DOAJ, SCIELO,…
PDF

How to Cite

Wang, Y., Li, W., Yin, G., Cheng, Z., Li, Y., Zhang, K., & Ma, R. (2026). Numerical Evaluation of Dynamic Constitutive Models and Modified Analytical Modeling for High-Velocity Penetration of Ultra-High-Performance Concrete (UHPC). Latin American Journal of Solids and Structures, 23(10), e9207. https://doi.org/10.1590/1679-7825/e9207

Abstract

This study evaluates and improves models for predicting the high-velocity penetration response of ultra-high-performance concrete (UHPC) used in protective structures. The research scope involves systematically comparing three common concrete constitutive models: Holmquist–Johnson–Cook (HJC), Riedel–Hiermaier–Thoma (RHT), and Karagozian & Case (K&C). First, the models' theoretical differences regarding strain-rate effects and tension-compression asymmetry were analyzed. Next, their material parameters were calibrated using fundamental mechanical tests and literature data. An LS-DYNA finite element model was then established and validated against ballistic experiments (633-959 m/s) by evaluating penetration depth, surface crater morphology, and internal damage evolution. The results indicate that the HJC model is the optimal choice for high-velocity penetration simulations. It yielded the lowest average depth error (-11.89%), and its localized damage pattern best matched UHPC's high-strength and high-toughness traits. In contrast, the RHT model caused premature matrix softening under high hydrostatic pressure, leading to a -21.76% error. The K&C model overpredicted surface funnel-shaped crater damage, with its penetration depth error increasing to -26.34% at high velocities. Furthermore, extended simulations at 800–1500 m/s revealed that the traditional Forrestal analytical model deviates significantly in the ultra-high-velocity regime. To solve this, a modified analytical model tailored for UHPC was developed. By accounting for dynamic yield and high-pressure shear rheological softening mechanisms, the new model introduces a dynamic strengthening coefficient and a rheological softening factor. Ballistic validation demonstrates that, within the validated range, the theoretical predictions of this modified model match the experimental data well, with a maximum relative error of 14.54%. Overall, this research provides reliable numerical model selection and theoretical support for designing and evaluating UHPC protective structures against kinetic energy projectile impacts. 

PDF
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright (c) 2026 Yalong Wang, Wenbin Li, Guixiang Yin, ZhongqiangC Cheng, Yiming Li, Kun Zhang, Ronghua Ma

Downloads

Download data is not yet available.